OSI® GreenSeries® Pro Foam II® Minimally Expanding Insulation Foam
OSI Products / Green Building Products / OSI® GreenSeries® Pro Foam II® Minimally Expanding Insulation Foam
OSI® GreenSeries® Pro Foam II® Minimally Expanding Insulation Foam OSI® GreenSeries® Pro Foam II® Minimally Expanding Insulation Foam is a one-part, moisture cure polyurethane foam in a pressurized container. It is specially designed to be dispensed in bead form for filling gaps, crack and holes in most types of construction projects to stop energy draining drafts and sound transmission. The closed-cell, energy saving foam insulates with an R-5 factor per square inch of foam with slight to minimal expansion. It adheres to all types of wood, metal, concrete, brick, glass, drywall, most plastics and other building materials.
- GreenGuard® Children and Schools certified
- Contributes to LEED® and NAHB building certification points
- Low foam pressure / low expansion product will not warp or deform windows or doors
- Aids in filling gaps or cracks to eliminate drafts and sound transmission
- High insulating value - Provides an R factor of 5 per inch of foam
- Closed foam structure will not absorb moisture
- Quick setting formulation - Can be cut or trimmed in less than 1 hour
- Will not harden or crack out over time
- Adheres to all types of wood, metal, concrete, brick, glass, drywall, most plastics and other building materials
- 29 oz (822g) aerosol can
- White
OSI® PC-12 Pro-Clean or mineral spirits
Related Products
Recommended for
OSI® GreenSeries® Pro Foam II® is recommended to insulate and fill around windows, door frame joints, jambs, mud sills, header and corner joints, top plate penetrations, exterior and T-joints, electrical and plumbing penetrations, and other areas where air infiltrates or heat loss can occur. It's ideal for adhering and joining insulation panels, and when used with the OSI® Pro Gun II®, may be used in place of conventional adhesives for adhering drywall to wood framing. Pro Foam II® also works well as an effective accoustical sealant for reducing sound transmissions and maintaining specified STC values in most wall partions.
Not Recommended for
- Without protection from UV light (i.e. sunlight); It should be painted or stained to prevent long term discoloratin or degradation
- Use near areas where hot work or flame cutting will be performed; if necessary, follow the recommended industrial procedures
- In contact with chimneys, heater vents, steam pipes or other areas which could be subject to surface temperature greater than 200°F
- Exposed areas; It should be covered with at least 1/2" cement plaster or fire-rated gypsum board or an equivalent barrier that will provide a finished fire rating of 15 minutes or more
- Use in areas that require a fire proof or fire stop materials
- For adhering to polyethylene (PE), PTFE, oils, greases, mold release agents and similar materials
- Cold weather applications; Containers should be kept at 65°F (18°C) for maximum performance; Product temperatures below 55°F (13°C) will experience slow extrusion rates
