OSI® GreenSeries™ Subfloor & Deck Adhesive
OSI Products / OSI® GreenSeries™ Subfloor & Deck Adhesive
OSI® GreenSeries™ Subfloor & Deck Adhesive OSI® GreenSeries™ SubFloor & Deck Adhesive is a high performance adhesive, non-flammable, environmentally friendly construction adhesive developed for Glued Floor Systems and other general construction needs, interior or exterior. This product's unique formulation offers a low gassing, latex-based adhesive without sacrificing strength and performance. This adhesive reduces nail schedules and allows for extended joint spans and the use of lower stress grade lumber where local building codes allow.
- Ultra Low VOC content meets stringent State and Federal VOC requirements
- GreenGuard® Children and Schools certified
- Contributes to LEED® and NAHB building certification points
- For Glued Floor Systems and other general construction needs, interior or exterior
- High initial grab helps reduce fastener requirements by up to 50% to 60%
- High performance, non-flammable, low gassing
- Will bridge minor gaps when bonding irregular surfaces
- Meets and exceeds APA AFG-01 and ASTM D 3498 specifications - Can be applied directly to dry, wet or frozen lumber
- Easy clean up water-based formulation does not sacrifice strength and performance
- 28 fl oz (825ml) cartridge
- White
Soap and water clean-up (uncured sealant)
Related Products
Recommended for
OSI® GreenSeries™ SubFloor & Deck Adhesive is primarily recommended for glued floor projects involving subfloor, tongue-and-groove flooring and deck construction. It works well for general construction needs such as installing all types of paneling (wood or pre-decorated), polystyrene and polyurethane foam panels, trim moldings and various wall tiles. GreenSeries SubFloor & Deck bonds to most common building materials including wood, wood products, engineered lumber, OSB, plywood, ceramic tiles and fiberglass. It is also ideal for use in recreational and prefab manufacturing.
Not Recommended for
- Bonding two non-porous surfaces
- Use on mirrors and metals that will corrode
- Exterior applications where rain is expected within 24 hours
- Applications requiring temperature resistance greater than 71°C (160°F)
- Underwater applications or permanent water immersion
- Polyethylene (PE), polypropylene (PP), Nylon™ or Teflon™
- Cement Board (Durock™)
